Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Cyclone III starter Kit control_panel problem

Hello friends,

I am using Altera Cyclone III FPGA Starter board (ep3c25f324) for controller design for my DC-DC power converter.

When I start 'board test system' or run control panel app that comes with the altera cyclone iii starter kit, the following error message appears :

https://mail.google.com/mail/u/0/?ui=2&ik=83c51d054e&view=fimg&th=14b05e2c51863eeb&attid=0.2.0.1&disp=emb&realattid=ii_14b05d1cd8889f85&attbid=ANGjdJ9LyroBd2-H9MW7if6_ymD3R2fRGiMJruyocbXOoOGUoVKawpbOJ93qxxzV8IGNDgb3Wk_1T-GdcnJwQ5vJBaTWTc-m8TekORylFaSl0cNLZr8YH9DfMl3wr9k&sz=w910-h154&ats=1421747910327&rm=14b05e2c51863eeb&zw&atsh=1

'Could not establish JTAG connection between the board and control panel application.'

I have installed cyclone iii starter kit 12.0.0, quartus ii web edition version 12.0 and usb blaster version 2.4.16.0 on my computer which is having windows 7, 32-bit operating system.

Please help me to solve this problem as it is hampering my work.

2 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    Hi,

    Just wonder if you have a subscription version to try to see if it helps?
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    10 years ago

    Hi Chitranshvarun,

    I am peipei, from The University of Manchester. I have bought Cyclone III EP3C25F324 starter development board and I am struggling in downloading the kit installation in my PC. I know this problem seems a little silly. But this actually is my problem!

    Would you mind help me where you downloaded? I have tried a lot of times on https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyc3-starter.html this page, kit installation of 11.0.0 or 12.0.0. They are does not work at all. The technical stuff have not helped me. So I seek help elsewhere.

    Thank you very much.

    Best wishes,

    peipei