Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Cyclone III problem with USB blaster JTAG communication

Hi all I've spent the last week debugging the jtag connection between the fpga and the usb blaster.:mad: I finally found something that is wrong.:) In JTAG there are 4 signals.. The fi...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

As an additional remark, Terasic USB Blaster is using a different JTAG driver circuit. The said Errata Sheet doesn't necessarily apply to it.

As a general solution, some kind of protection should be provided for the JTAG port, e.g. schottky clamps to GND/VCCIO with small series resistors.