Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorcyclone 3 and odd pin behavior
Using EP3C40F324I7N andEPCS16 in 'jic' setup. 'appears' only one pin, outputting a clock, D7, when programmed by the EPCS16, outputs a 'high' instead of a clock. (as apposed to low for un-assigned pi...
Altera_ForumHonored Contributor
Honored Contributor"... but haven't test(ed) it..."
but then, when booting from ecps16, the pin is 'high' and when load directly with 'sof' file, it goes 'low'. still wrong....
