Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

cyclone 2 only support output pin up to 360MHZ?

Hi! I draw a simple PLL using altpll setting with two frequency generate which are in 100Mhz and 500Mhz. however, I found that during compiling process, there is an error saying that target dev...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

sorry to tell you that the maximum current strength is 2mA,so i can't do it you tell me !

but when i set maximum current strength ,the result is the same as above，thank you！