Forum Discussion

ericmtzr's avatar
ericmtzr
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

cyclone 10GX - Programming issue

Here is the problem statement. 1. There are low pulses of ~1.7ms on the nStatus signal at every ~280ms interval. We suspect that this might be due to POR error. - Power sequence is verified as p...
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi ericmtzr,


We still looking into this issue. Will get to you once there is any findings.


Regards,

Fakhrul