Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Cyclone 10 LP : VCCA Voltage

Hello All! I have a new design with Cyclone 10 LP family. I would like power the VCCA pins to 3,3V, but is not clear to me if it's possible. In the "Cyclone 10 LP datasheet", C10LP51002 Ta...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi Anand,

Is good engineering practices writing clear datasheets, with min/typ/max specifications, not confusing with unclear comments in another different document.

3.3V is far from the 3.75V maximum specified, so operate at 3.3V is operating in the characteristics listed in the specification, with big margin.

The question is, Can I connect VCCA to 3.3V?.

Peio