Forum Discussion

CRubi's avatar
CRubi
Icon for New Contributor rankNew Contributor
7 years ago

Custom Board using Arria 10 (10AS057) with Marvell MVL88E1512

Hi, I have Arria 10 (10AS066) Evaluation kit and downloaded the TSE example (a10_soc_devkit_tse.tar.gz -https://releases.rocketboards.org/release/2017.10/tse/hw/) I was able to compile the project,...
CRubi's avatar
CRubi
Icon for New Contributor rankNew Contributor
7 years ago

Hi SK Lim,

I've reviewed the schematic of the arria10 dev kit [arria10_10as066n3f40_soc_v15.1.2] a10_soc_devkit_03_31_2016.

See attached file. It shows that MDIO and MDC are connected to FPGA pin AV16 and AV17 which is not HPS as shown on pin mapping[TSE example] as well.

May I know where [configuration or code] of the 'control port of TSE IP is connected to HPS' you mentioned above.

Thanks,

Allen Rubis