Forum Discussion

CRubi's avatar
CRubi
Icon for New Contributor rankNew Contributor
7 years ago

Custom Board using Arria 10 (10AS057) with Marvell MVL88E1512

Hi, I have Arria 10 (10AS066) Evaluation kit and downloaded the TSE example (a10_soc_devkit_tse.tar.gz -https://releases.rocketboards.org/release/2017.10/tse/hw/) I was able to compile the project,...
SengKok_L_Intel's avatar
SengKok_L_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

Here is the MVL88E1512 datasheet that I can search from the web:

https://web.pa.msu.edu/hep/atlas/l1calo/htm/hardware/components/Enet_Phy/marvell_alaska_phy_88e151x_datasheet_jan18.pdf

By referring to table 29, to support the SGMII to copper, you need to configure the MODE [2:0] register to 001, this is located at General control register 1. Please contact Marvell to get an official datasheet, and also the detail information of how to configure it as per your design requirement if you haven't done so.

Regards SK Lim (Intel)

​