Forum Discussion

MHEDA's avatar
MHEDA
Icon for New Contributor rankNew Contributor
6 years ago

Critical Warning 16248 (pin is placed too close with ADC pins) and TSD use.

Hi, For my current project i use an IntelFPGA MAX10 (10M40DAF484) and i use a lot of the available IO's. Moreover, i need to use the internal temperature sensor. So i add the hard ADC IP and my own...
MHEDA's avatar
MHEDA
Icon for New Contributor rankNew Contributor
6 years ago

Hi,

i've read both link you've mentionned.

However in both cases, analog inputs are used with the ADC. In my case i only want to use the TSD, so no analog pins are used. Is the temperature sensor is impacted by the GPIO close to ADC pins ?