Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorconverting an ordinary signal to a global signal?
Hello,
i am using EP3C16 in my project. due to my carelessness, a clock input is connected to the ordinary pin. now i need to feed this clock into a PLL, as it is not a global clock input, compilation fail to pass. i am now flying a line on my board to temporarily solve the problem. i wonder if there is any module that can convert an ordinary signal to global signal that can be feed into PLL directly. thanks.2 Replies
Altera_Forum--- Quote Start --- Not on the Cyclone III... only a clock input pin can feed a PLL. --- Quote End --- thank you for your replying, although it is indeed a bad news.- Altera_Forum
Not on the Cyclone III... only a clock input pin can feed a PLL.
