Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

configure flex10k fpga with atmega16 processor

Hello all, Im doing a project for the uni. and at this point i sent a *.sof file through rs232 to atmega16 processor and store it in an eeprom through the TWI interface. now i need to configur...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

--- Quote Start ---

it forces me to configure the device through the jtag interface

--- Quote End ---

I don't agree. The UP2 configuration chip has a socket that gives access to all PS interface lines. It can be used to connect a microblaster driver. But there are also embedded JTAG solutions based on the Altera JAM Player software.