Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

configure flex10k fpga with atmega16 processor

Hello all, Im doing a project for the uni. and at this point i sent a *.sof file through rs232 to atmega16 processor and store it in an eeprom through the TWI interface. now i need to configur...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Thanks for your help.

I checked the project you talked about and as you said it shows passive serial configuration.

unfortunally as i sad in my first post My flex10 device sits on up2 education kit, so it forces me to configure the device through the jtag interface and not by passive serial configuration.

thanks again,

Nadav.