Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorconfigure flex10k fpga with atmega16 processor
Hello all, Im doing a project for the uni. and at this point i sent a *.sof file through rs232 to atmega16 processor and store it in an eeprom through the TWI interface. now i need to configur...
Altera_ForumHonored Contributor
Honored ContributorConfiguration methods aren't specific for flex10k, passive serial and passive parallel configuration is basically common between all Altera FPGA. Thus there's actually a lot of application notes and reference designs dealing with this topic. Particularly a project named Microblaster gives a solution for passive serial and parallel configuration through an embedded processor. You'll find it at altera.com. By the way, *.sof files are dedicated to JTAG configuration. *.rbf is used for passive serial normally.
