Forum Discussion

YCao8's avatar
YCao8
Icon for New Contributor rankNew Contributor
7 years ago

Configuration file in EPCS64 Device mismatch with the initial POF file

A FPGA in one of my boards cannot load configuration file from EPCS64 device after power on. when I verify the EPCS64 device content with the original pof file using Quartus II Programmer software,...
YCao8's avatar
YCao8
Icon for New Contributor rankNew Contributor
7 years ago

The FPGA is an EP3S device and it works well when I configured it with sof file in JTAG mode.

'EPCS64 device content with the original pof file' - I mean a failure is reported when performing verification with the pof file using Quartus II 9.1 Programmer software. so I think configuration file stored in EPCS64 have changed, and is mismatch with the pof file.