Forum Discussion

AlexHalf's avatar
AlexHalf
Icon for New Contributor rankNew Contributor
2 years ago

CONF_DONE pin failed to go high problem

Hello I am using EP4CGX150CF23C8N FPGA. Configuration is done in AS mode from EPCQ128ASI16N flash. All I/O banks are 3.3V. FPGA initial programming done through JTAG with Terasic USB blaster. Attach...
Configuration
ArleyHenrique's avatar
ArleyHenrique
Icon for New Contributor rankNew Contributor
1 year ago

Hi Dear,

Could you please share the solution?

Regards,

Arley

HAlex's avatar
HAlex
Icon for Occasional Contributor rankOccasional Contributor
1 year ago

Hello

Nothing new to share.

The problems occurred only on 2 boards and not reproduced anymore. Mayb had a local problem with USB blaster or power supply ?

Best regards

Alex