Forum Discussion
AlexHalf
New Contributor
New ContributorCONF_DONE pin failed to go high problem
Hello I am using EP4CGX150CF23C8N FPGA. Configuration is done in AS mode from EPCQ128ASI16N flash. All I/O banks are 3.3V. FPGA initial programming done through JTAG with Terasic USB blaster. Attach...
FakhrulA_altera
Regular Contributor
Regular ContributorHi HAlex,
Just want to confirm, If you directly program the FPGA through JTAG using sof file(not jic) , is it successful?
HAlex
Occasional Contributor
Occasional ContributorHello
No, sof file download is not successful.
It looks like the problem damaged somehow the FPGA and it is not reacting anymore to any FPGA download or flash burning attempt.
Thank you.
Alex
