Code for optimum PLL reconfig values

I agree with you altera should provide better documentation.

I've spent 2 weeks trying to read the same document over and over again to see if i missed any important points. but still i am SOL.

So far i have figured out how to calculate M, N and C and i understand that changing these values will give me the required fout using formula, fvc0 = (fin * M/N) and fout = (fin * M)/(n * C)

but when i run these through PLL reconfig, my pll doesnt change.

Weird thing is when the program first starts, due to unknown reason, my busy signal is always high!