Forum Discussion

verna's avatar
verna
Icon for New Contributor rankNew Contributor
4 years ago

clock control signal problem on Cyclone V GT

I'm working with the Cyclone V GT development board.My design only needs to use frequency divider to get the signal, I tried to use 240MHz to divide the frequency and can get the signal successfully,...
SyafieqS's avatar
SyafieqS
Icon for Super Contributor rankSuper Contributor
4 years ago

Let me know any update on this


  • verna's avatar
    verna
    Icon for New Contributor rankNew Contributor
    4 years ago

    Hi SyafieqS,

    I will try this method. If this method is still unsuccessful, I may only use frequencies between 200MHz and 300MHz for frequency division, and I can only temporarily not use other frequencies for frequency division.

    Thank you tour suggest.