Forum Discussion

New Contributor

7 years ago

Can't write MT25QU256 using ASMI Parallel IP

Hi, I use EPCQL-256 replacement part MT25QU256 for A10GX AS x4 configuration. JIC programming and boot works so flash is working. I am trying to implement ASMI parallel to write data to flash (user...

ShafiqY_Intel

Frequent Contributor

7 years ago

Hi,

In order for you to use Micron MT25Q device, you need to enable MT25Q support.

Please refer to following link to enable MT25Q support.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/component/2018/how-do-i-enable-micron-s-mt25q-support-for-eol-of-epcq---256mb--.html

Kindly try it out with your design and let us know the result.

Thank you. 😉

Forum Discussion

Can't write MT25QU256 using ASMI Parallel IP

Recent Discussions

RSU: Corrupted decision firmware after loading initial RSU image jic (Stratix 10)

8 port 10/25G ethernet interface in Stratix 10

COD (Country of Diffusion ) for part# '5M40ZE64I5N'

Part query<45714>

ModelSim-Intel FPGA Starter Edition 18.1 exits with code 211 when pressing Restart button