Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Can't recognize silicon ID for device 1

I designed FPGA Board using Cyclone V Device and EPCQ512 programming. When program the device using .sof it loads successful and output is also correct. But when i try to program using .ji...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

There's nothing wrong with the bit of schematic you've posted. Does CONF_DONE go high?

Cheers,

Alex