Forum Discussion

MDARG's avatar
MDARG
Icon for New Contributor rankNew Contributor
6 years ago

Cannot program the FPGA on the Intel Cyclone 10 GX Development Board

Hi all! When I try to program the Intel Cyclone 10 GX on the Cyclone 10 GX Development Board, I always get the Error message: "Can't configure device. Expected JTAG ID code 0x02E120DD for device 2,...
MDARG's avatar
MDARG
Icon for New Contributor rankNew Contributor
6 years ago

Hi,

Thank you for the answer!

Problem was solved when I uncoupled the FMC JTAG chain from the main JTAG chain via DIP switch.

I don't know why this caused a problem, but now it works just fine.