Forum Discussion

NguyenTran's avatar
NguyenTran
Icon for New Contributor rankNew Contributor
5 years ago

Cannot get flash to program FPGA on power on or reset for Stratix IV Cyclone

This was all done on a Stratix IV Cyclone development board: DK-DEV-4SGX530N Versions: Quartus 18.1 I have followed all the documentation regarding offsets, switches for PFL, and making sure a...
SyafieqS's avatar
SyafieqS
Icon for Super Contributor rankSuper Contributor
5 years ago

Hi Nguyen,


Can you double confirm by reprogramming the flash and reboot it? This issue could be due corrupt image file in the flash.


Thanks,

Regards


  • NguyenTran's avatar
    NguyenTran
    Icon for New Contributor rankNew Contributor
    5 years ago

    Hello,

    So an update, I got it to flash to the user hardware portion correctly. My mistake was that i am using the 530 version of the fpga while using files for the 230. So the memory mapping has changed and that is why the flash is programmed correctly and does not complain.

    Thanks,