can arria-10-gx run on aarch64 nvidia jetson?

after minor upgrade it has become as listed below;

shall I still install 5.8 kernel?

 lspci -s 07:00.0 -vv
07:00.0 Processing accelerators: Intel Corporation Device 09c4
	Subsystem: Intel Corporation Device 0000
	Physical Slot: 1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	NUMA node: 0
	Region 0: Memory at 80600000 (64-bit, prefetchable) [size=512K]
	Region 2: Memory at 80680000 (64-bit, prefetchable) [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: dfl-pci
	Kernel modules: dfl_pci

sudo ./hello_fpga 
Using OPAE C library version '1.1.2' build 'fa90f2cd'
Error enumerating accelerators: no driver available
Error no matching accelerator: not found

or the dev stack environment needs to be reinstalled?

Linux hp-ProLiant-MicroServer-Gen10-Plus 5.4.0-117-generic #132~18.04.1-Ubuntu SMP Thu Jun 2 23:36:48 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

 sudo fpgasupdate $OPAE_PLATFORM_ROOT/hw/samples/nlb_mode_0/bin/\
> nlb_mode_0_unsigned.gbs
[2022-06-10 04:13:07,711] [ERROR   ] No suitable PAC found.

However installing 5.8 with

apt install linux-image-unsigned-5.8.0-49-generic linux-headers-5.8.0-49-generic

The following NEW packages will be installed:
  linux-headers-5.8.0-49-generic linux-hwe-5.8-headers-5.8.0-49

at this step I can see some crash log for fpga from prior attempts like

  CC [M]  /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm-debug.o
 /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm.c: In function ‘show_csk_vector’:
 /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm.c:369:2: error: implicit declaration of function ‘bitmap_from_u32array’; did you mean ‘bitmap_from_arr32’? [-Werror=implicit-function-declaration]
   bitmap_from_u32array(csk_map, TCM_CSK_BIT_LEN, csk32,
   ^~~~~~~~~~~~~~~~~~~~
   bitmap_from_arr32
   CC [M]  /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-iperf.o
   CC [M]  /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-dperf.o
   CC [M]  /var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-error.o
 cc1: some warnings being treated as errors
 scripts/Makefile.build:270: recipe for target '/var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm.o' failed
 make[2]: *** [/var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm.o] Error 1
 make[2]: *** Waiting for unfinished jobs....
 Makefile:1762: recipe for target '/var/lib/dkms/intel-fpga/2.0.3/build' failed
 make[1]: *** [/var/lib/dkms/intel-fpga/2.0.3/build] Error 2
 make[1]: Leaving directory '/usr/src/linux-headers-5.4.0-117-generic'
 Makefile:115: recipe for target 'all' failed
 make: *** [all] Error 2
DKMSKernelVersion: 5.4.0-117-generic
Date: Fri Jun 10 04:02:39 2022
DuplicateSignature: dkms:opae-intel-fpga-driver:2.0.3:/var/lib/dkms/intel-fpga/2.0.3/build/drivers/fpga/intel/fme-tcm.c:369:2: error: implicit declaration of function ‘bitmap_from_u32array’; did you mean ‘bitmap_from_arr32’? [-Werror=implicit-function-declaration]
Package: opae-intel-fpga-driver 2.0.3
PackageVersion: 2.0.3
SourcePackage: opae-driver
Title: opae-intel-fpga-driver 2.0.3: intel-fpga kernel module failed to build

However 5.8 kernel has been installed

which steps are required next?

Linux hp-ProLiant-MicroServer-Gen10-Plus 5.8.0-49-generic #55~20.04.1-Ubuntu SMP Fri Mar 26 01:01:07 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

Linux hp-ProLiant-MicroServer-Gen10-Plus 5.4.0-113-generic #127~18.04.1-Ubuntu SMP Wed May 18 15:40:23 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

The error/ issue is on x86_64 Xeon computer

 lspci -s 07:00.0 -vv
07:00.0 Processing accelerators: Intel Corporation Device 09c4 (rev ff) (prog-if ff)
	!!! Unknown header type 7f
	Kernel driver in use: dfl-pci
	Kernel modules: dfl_pci

!!! Unknown header type 7f