Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

CameraLink with Cyclone IV GX

I'm looking at making a CameraLink transmitter using the GX transmitter blocks in the Cyclone IV. ALTGX won't allow me to select a channel width of 7 which is the serialization factor. Is this an i...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

That's even better. I'm looking at Table 5-1 for the Base Config. and please correct me if I'm wrong here. I would connect the DS90CR287 to Channel Link Signals X0+-, X1+-, X2+- and X3+-? Now what should I connect to SerTC+-, SerTFG+-? I'm connecting to a CCD detector and the fpga will drive the DS90CR287. I'm only getting image from the CCD and not communicating with it.