Forum Discussion

RShal4's avatar
RShal4
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Bytes lost in uart in 921600Bis/sec

Hello, We are struggling with UART issue, I hope someone have any idea how to handle it. We have several UARTs on our device, after having this issue we updated the IP from simple UART IP to FIFO...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Ranran,

The shared design examples show you how to use Intel's IP. I understand that there are third parties IPs give a good FIFOs. You are free to use them and Intel still gives you some useful IPs to help you.

Please check the following page to understand the required clock frequency to get the desired Baud rate you are aiming.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_embedded_ip.pdf#page=127

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_embedded_ip.pdf#page=128

Regards,