Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

BLVDS termination for MAX 10

I am using a MAX 10 to drive another chip using LVDS. I am using the true LVDS driver. I would like tobe able to Tri-State the LVDS driver when the power to the chip that I am driving is not enable...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Refer to AN-522 - "Implementing Bus LVDS Interface in Supported Altera Device Families".

Yes - this suggests the use of series termination resistors as well as termination resistors for each end of the bus.

For MAX 10 use the "GPIO Lite IP" core.

Cheers,

Alex