Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

bad configuration snheme of MSEL , cycloneIII

hello VCCIO of the banks in which the configuration pins reside is 3.3V the EPCS64 used is powered by 3.3V and my big problem is : the MSEL pins are [3..0] : 0100 => meaning acti...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

thanks ,

I'm use the EP3C80 .

what about my first problem : I select MSEL scheme for a 2.5V/3.0V when in fact the MSEL signals are connected to 3.3V and the programming device is connecting to 3.3V too.

unimportant selection?