Forum Discussion

RClan2's avatar
RClan2
Icon for New Contributor rankNew Contributor
5 years ago

ATX PLL Stuck In Calibration

I have an Arria10 design which includes an ATX PLL. The design operates properly on most boards but on about 10% of boards the ATX PLL never exits calibration ( i have verified the frequency of the r...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


As I understand it, Andy seems to have helped open an IPS case on this. I have responded to the IPS especially on the CLKUSR requirement. Please let me know if you would require further clarification. Thank you.