Forum Discussion

KBloo3's avatar
KBloo3
Icon for New Contributor rankNew Contributor
4 years ago

AS & JTAG configuration issue on custom made CycloneIV EP4CE6F17C7N board

Hi all, I hade this issue up in the Intel support earlier this summer, but I had some weeks of holiday and when I got back the thread was closed and I was directed to this place. Could someone pl...
Farabi_Altera's avatar
Farabi_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hello Kenneth ,


All VCCIO need to power up as this is monitored by POR(Power On Circuitry), if one of the VCCIO not powered, POR will stuck the device in reset mode and not complete configuration.


regards,

Farabi