Forum Discussion

malayali's avatar
malayali
Icon for New Contributor rankNew Contributor
4 years ago

Arria10 FPGA config_done is not coming up after programming.

Hi, I have designed a board with Arria10 FPGA (10AX057N2F40E2SG), Totally we have 5 boards manufactured, and in that 3 boards have this issue. I can able to program the FPGA, In the Quartus prime ...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Thanks for the information. It sounds like the flash could have issue as SOF is working fine. Can you please check on the data bus and see if anything coming from/to the flash?


Another thing is that, what is the resources utilization in quartus compilation report for full design?