Forum Discussion

malayali's avatar
malayali
Icon for New Contributor rankNew Contributor
4 years ago

Arria10 FPGA config_done is not coming up after programming.

Hi, I have designed a board with Arria10 FPGA (10AX057N2F40E2SG), Totally we have 5 boards manufactured, and in that 3 boards have this issue. I can able to program the FPGA, In the Quartus prime ...
malayali's avatar
malayali
Icon for New Contributor rankNew Contributor
4 years ago

Hi,

I have different programming files (.JIC) for example LED Blinking, Some IO+ PCIe+DDR, and Full IO utilized JIC. In this only with Full IO including DDR,PCIe,SERDES utilized program JIC is only not working on 3 boards. but the same sof is working.