Forum Discussion

LElis1's avatar
LElis1
Icon for New Contributor rankNew Contributor
6 years ago

Arria10 Custom Board DDR calibration issues

Hi everyone. My team and I are trying to boot a custom board embedding an Arria10 module. However, U-Boot fails during boot with the error "DDRCAL: Failure". Here is an explanation of the startup p...
smaz's avatar
smaz
Icon for New Contributor rankNew Contributor
5 years ago

Have you find a solution ?

We have a similar problem on a board we designed internally, where we need to launch ddr calibration twice in u-boot. All our attempts failed for now.

Any input is very welcome.