Forum Discussion

Honored Contributor

10 years ago

Arria II GX PCIe card not recognized by OS

Hi, all I purchased the Arria II GX development kit and happily place it on my server's PCI slot, without changing any DIP switch or anything. But after OS (linux) boots, I can't find the devi...

Altera_Forum

Honored Contributor

10 years ago

Refer to the 'Factory Default Switch Settings' on page 4-2 of the user manual (https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/ug/ug_aiigx_fpga_dev_kit.pdf). It looks like the PCIe mode DIP switch (SW3) needs to be changed before your server will detect the card's presence. The default setting is such that your server won't detect the card.

Cheers,

Alex

Forum Discussion

Arria II GX PCIe card not recognized by OS

Recent Discussions

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information

Cyclone 10 LP's Extended Industrial parts