Forum Discussion

VivekV's avatar
VivekV
Icon for New Contributor rankNew Contributor
4 years ago
Solved

ARRIA 10 NOT PROGRAMMING

Hi We are using the 10AX027H4F34E3SG Arria10 device in our design and have noticed that the arria 10 device has stopped getting programmed recently. 1) The device gets detected and boundary scan...
  • NurAiman_M_Intel's avatar
    NurAiman_M_Intel
    4 years ago

    Hi Vivek,


    It is ok for INIT_DONE to be high before configuration.


    Reason we ask to switch the FPGA to another good FPGA because we need to know if the board is working or not as we suspect the board is having problem. It is better to try this.


    Regards,

    Aiman


NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
4 years ago

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you


VivekV's avatar
VivekV
Icon for New Contributor rankNew Contributor
4 years ago
Hi,
We have sent for replacement. Currently I will close this. Once we test I can comment
Thank you