Forum Discussion

YTagu5's avatar
YTagu5
Icon for New Contributor rankNew Contributor
6 years ago

Appropriate I/O standard to use DDIO for LVDS signals

Hi, I'm using ADS5263, a high-speed ADC, and trying to receive test pattern from this ADC. To make everything simple, I first set the clock frequency of ADC to its minimum, 10MHz. Because the data i...
Rahul_S_Intel1's avatar
Rahul_S_Intel1
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi ,

Kindly let me know, if you need further assistance.

  • YTagu5's avatar
    YTagu5
    Icon for New Contributor rankNew Contributor
    5 years ago

    Hi RahulS,

    I'm sorry that I missed the reply notification.

    At first, I was trying to use DDIO. but I found that I need phase alignment to receive data correctly, so I started to use SERDES IP. The SERDES is working properly now.

    So I don't need assistance for this topic anymore.

    Thank you for kindly reading my post.

    Best regards,

    Yoshitaka