Forum Discussion
AGofs
Occasional Contributor
Occasional ContributorAltera PLL and Altera PLL Dynamic reconfiguration : choose C-counter for two outputs simultaneously.
Good morning, I'm working with Altera PLL/Altera PLL reconfig IP (Cyclone V). The input to Altera PLL is 160 MHz ,the outputs are 125 MHz each with difference of 225 degrees . Then I want to chang...
AGofsOccasional Contributor
Occasional ContributorHello,
It sticks at the start of the Reconfiguration.
But I've found some errors at the TB. After repairing these errors, the TB seems working...
