Forum Discussion

HI51's avatar
HI51
Icon for New Contributor rankNew Contributor
11 months ago

Agilex5のJTAGコンフィギュレーションモードで起動した場合のSDM_IO0~16の状態について

Agilex5をJTAGコンフィギュレーションモードで起動した場合のSDM_IO0~16の状態について教えてください。

「Device Configuration User Guide: Agilex™ 5 FPGAs and SoCs」の「3.2.6.1. Programming Serial Flash Devices using the AS Interface」において、「AS_CLK, AS_nRST,AS_DATA0-AS_DATA3, and AS_nCSO0-AS_nCSO3」はtristatesとなると記述がありますが、プルアップ抵抗/プルダウン抵抗の有無、およびほかのSDM_IOの状態も教えてください。

2 Replies

  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    11 months ago

    Hi HI51,


    In JTAG configuration mode, SDM_IO0–16 are not active. The AS interface pins (AS_CLK, AS_nRST, AS_DATA[3:0], AS_nCSO[3:0]) go to tristate with internal weak pull-ups to VCCIO_SDM. Other SDM_IO pins are also tristated with weak pull-ups. No external pull-downs are required.


    Regards,

    Fakhrul



  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    11 months ago

    As we haven't received a response to our previous notification, this thread will be transitioned to community support. We hope all your concerns have been addressed. If you have any new questions, please feel free to open a new thread to receive support from Intel experts. Otherwise, community users will continue to assist you here. Thank you.