Forum Discussion

SDavi9's avatar
SDavi9
Icon for Occasional Contributor rankOccasional Contributor
3 months ago

Agilex 5 FPGAs compatible with external optical transceiver

I have an external optical transceiver that states that it is compatible with the Ethernet 40GbE standard and InfiniBand QDR and FDR standards, which includes XLAUI, XLPPI, CPPI, and SFI interfaces. ...
RongY_altera's avatar
RongY_altera
Icon for Contributor rankContributor
3 months ago

Hi,

You can find Agilex 5 GTS Eth Hard IP intro at below website.

https://www.intel.com/content/www/us/en/products/details/fpga/intellectual-property/interface-protocols/gts-ethernet-hard-ip.html#tab-blade-1-0


And supported Eth IPs here.

https://www.intel.com/content/www/us/en/docs/programmable/817676/25-1-1/ethernet-portfolio-and-target-applications.html


It is hard to conclude which optical transceiver module would interoperate due to any mismatch between FPGA IP configuration and module capability will cause link failure. You may contact your local DFAE to help the selection.



Regards,

Rong