Forum Discussion

Occasional Contributor

3 years ago

AGFB014R24B2E2EV : Evaluation board not booting with eMMC memory

Dear Experts, We received the new AGFB014R24B2E2EV Eval board when we switched on the board the HPS Linux running was noticed on UART when Out of box experience daughter card was plugged in. No...

EBERLAZARE_I_Intel

Regular Contributor

3 years ago

Hi,

Just to check again, when you mention select eMMC as boot option do you mean setting the jumper on the daughter card?

Check the jumper Settings (for eMMC):

https://www.rocketboards.org/foswiki/Projects/AgilexSoCWithEMMCStorageOnHPS#Prerequisites

Can you confirm that the eMMC is active with above pins setup? And that still no prints?

MK_086
Occasional Contributor
3 years ago
Hi,

We verified the jumper settings as per manual but still no prints observed on the UART.

Thanks

Forum Discussion

AGFB014R24B2E2EV : Evaluation board not booting with eMMC memory

Recent Discussions

Agilex 5 Sulfur Partial Write Issue on F2H ACE‑Lite I/F (256‑bit) with AXI Master of 128‑bit

Cyclone 10 LP's Extended Industrial parts

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Quartus Pro simulation libraries for Riviera Pro

LTC Connector DE10-Standard FPGA