Forum Discussion
KWang97
Occasional Contributor
Occasional ContributorAfter watchdog for dual-config is enabled, the FPGA seems like not work properly every dozens of seconds. Why?
FPGA communicates with another FPGA with PHY chip. Normally(watchdog enable checkbox not checked), the PHY link led is always off when communication is good. While after I enble watchdog for dual-con...
JohnT_Altera
Regular Contributor
Regular ContributorHi,
You can create a simple JTAG to Avalon Master IP with On Chip Flash IP design to program to Max 10 device and use Quartus System Console to write into the specific UFM address to store the Serial Number.
Attach is the design example that I created for Max 10 Development kit.
