Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorADC acquisition with FPGA
Hi, I´m trying to interface an ADC9254 (from ti) converter in VHDL with board DSP Development Board for Stratix II Edition, in order to do an acquisition for signal, but i´m new in this type of de...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- VHDL wise, Interfacing the FPGA with the ADC is, in itself, quite trivial: use the ADC's Data Output Clock to register the ADC's Data Output signals. --- Quote End --- And use dedicated clock input pin at same io bank with data bus.
