Forum Discussion

SGlow's avatar
SGlow
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Active serial configuration using MT25QL01G device

I have a Cyclone-V design that I've been successfully configuring using a 1 Gbit Micron N25Q flash chip. That flash chip is now obsolete, so we built some boards using the newer MT25QL01G chip from ...
Nooraini_Y_Intel's avatar
Nooraini_Y_Intel
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

Hi SGlow,

Yes, please use Quartus Prime v18.1 as the MT25QL01G flash device selection is already available in the Convert Programming File tools. The AS configuration should work with the MT25Q as these flash devices has been validated.

Regards,

Noroaini