Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorA little help with verilog please.
wire ts_irig_wire;
reg ts_irig;
always @(posedge clk_c0)
begin
ts_irig <= {bit_num_cont6,bit_num_cont5,bit_num_cont4,bit_num_cont3,bit_num_cont2,bit_num_co...
Altera_ForumHonored Contributor
Honored ContributorThanks, so a declaration of
wire [23:0] wirename is a 24 bits bus and a declaration of wire wirename[23:0] consists in 24 wires of 1 bit?
