Forum Discussion

kh12's avatar
kh12
Icon for New Contributor rankNew Contributor
2 years ago

Which EPCQ device is meant to be used with the Arria V?

I have a 5AGXFA5H4F35I5G Arria V FPGA. I used to have a Cyclone V and I used EPCQ128ASI16N, however I cannot find information on which EPCQ can be used with the Arria V

Board Debug
Fpga Devkit

3 Replies

  • FvM's avatar
    FvM
    Icon for Super Contributor rankSuper Contributor
    2 years ago
    Hi,
    you find the maximal configuration bitstream size in device datasheet. It's about 110 Mbit for Arria V GX A5, thus EPCQ128 is sufficient for single configuration image.

    Regards,
    Frank
  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi kh12,

    I hope you are doing well. I believe the answer provided by Frank has addressed your question.

    Regards,
    Fakhrul

  • FakhrulA_altera's avatar
    FakhrulA_altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Please be advised that due to the absence of a response from you regarding the previous notification we provided, we will be transitioning this thread to community support. If you have any new questions or concerns, we kindly suggest opening a new thread to receive assistance from Intel experts. However, if you do not have any further inquiries, the community users will be available to assist you on this thread. Thank you for your understanding.