Forum Discussion

Occasional Contributor

7 years ago

Using DE10-nano GPIO1/GPIO0 from Linux

I’m trying to use GPIO on DE10-nano evaluation board connectors JP1/JP7. From documentation I assumed these IOs directly accessible from HPS. However, by using various demo C code I only managed to ...

EBERLAZARE_I_Intel

Regular Contributor

6 years ago

Hi,

Have you run though the "Example for HPS SoC" in the DE10-nano user manual in Chapter 6?

Regards.

jackhab

Occasional Contributor

6 years ago

I finally got it running after I found out the GPIO on JP7 connector are mapped in Linux starting at number 107.

Forum Discussion

Using DE10-nano GPIO1/GPIO0 from Linux

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout