Forum Discussion

New Contributor

6 years ago

Using Cypress SPI Flash to configure Arria II GX device

I'm interested in using a Cypress SPI Flash memory to configure an Arria II GX FPGA. I've read that some earlier versions of Quartus check the device ID before programming. The Device ID check fai...

YuanLi_S_Intel

Regular Contributor

6 years ago

Hi Hai,

Apologize that it is not with v19 and v20. You may check our 3rd party flash support at link below:

https://www.intel.com/content/www/us/en/products/programmable/configuration-device.html

Thank You.

Regards,

Bruce

HSteg
New Contributor
6 years ago
Thanks Bruce.
Hal

Forum Discussion

Using Cypress SPI Flash to configure Arria II GX device

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA