Forum Discussion

New Contributor

7 years ago

Use UART controller from FPGA in CycloneV, DS1-Soc board

I'm looking forward for simple design flow to implement serial interface between FPGA and Host PC. I'm aware I can connect HPS pins to FPGA to get uart_rx and uart_tx signals. Platform editor allows...

jrodr29

New Contributor

7 years ago

Here is helpful information regarding connection:

https://forums.intel.com/s/question/0D50P00003yyQXbSAM/how-to-let-fpga-get-access-to-hps-pins?t=1557442829227&searchQuery=

Key it to use loan 49 and loan 50 on this board (instead of 60 and 61 which would be the direct understanding in Platform Designer gui)

Forum Discussion

Use UART controller from FPGA in CycloneV, DS1-Soc board

Recent Discussions

Why 390.625MHz clock to F-Tile Reference fequency

Cyclone V GT Dev Kit - new units fail to boot from FPP

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera