Forum Discussion

AutoSpiderZ's avatar
AutoSpiderZ
Icon for New Contributor rankNew Contributor
5 years ago

USB Blaster issues with Ubuntu 20.01

Good Afternoon and Thank You for helping resolve this issue. I have tried everything, scouring the internet for days to use my Altera USB Blaster on Ubuntu 20. It works with the drivers on my wind...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Can you try the following?

  • kill the jtagd process and run it as root.


Thank You


  • AutoSpiderZ's avatar
    AutoSpiderZ
    Icon for New Contributor rankNew Contributor
    5 years ago

    I have tried this to, but the errors are the same.

    • AutoSpiderZ's avatar
      AutoSpiderZ
      Icon for New Contributor rankNew Contributor
      5 years ago

      I think the error message in dmesg|tail when I first attach the device is telling me it is not setup properly.

      [ 2074.649770] usb 1-3: new full-speed USB device number 2 using xhci_hcd
      [ 2074.826315] usb 1-3: New USB device found, idVendor=09fb, idProduct=6001, bcdDevice= 4.00
      [ 2074.826319] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
      [ 2074.826321] usb 1-3: Product: USB-Blaster
      [ 2074.826323] usb 1-3: Manufacturer: Altera
      [ 2074.826325] usb 1-3: SerialNumber: FYDK2020
      [ 2079.941816] usb 1-3: can't set config #1, error -110