Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

TTK .. having difficulties

http://www.alterawiki.com/wiki/use_transceiver_toolkit_to_measure_pci-express_link_signal_integrity Using this reference design ... I tried with Quartus 13.1 and 14.0 and in both cases after lo...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Hi all,

I can confirm that creating the Qsys design with the PHY at address 0 and the reconfiguration controller at address 0x800 allows the Transceiver Toolkit default channel/link configuration to operate correctly.

Here's a couple of TTK images for an Arria V GZ board (Texas Instruments TSW14J56EVM).

https://www.alteraforum.com/forum/attachment.php?attachmentid=10625

https://www.alteraforum.com/forum/attachment.php?attachmentid=10626

Cheers,

Dave