Forum Discussion

New Contributor

7 years ago

Trouble connecting DE0-Nano board to computer for programming.

I have a DE0-Nano board with a Cyclone V FPGA. I am trying to program it using Quartus 2, but I cannot communicate with the board over my Altera Blaster cable. I have installed the correct driver sof...

Vicky1

Regular Contributor

7 years ago

Hi,

"Do visual check of board, clean with care also provide screenshot of programmer & errors." ---- please provide screenshot of programmer after performing 'Auto Detect'.

You can refer the 'Debugging JTAG Chain Integrity' Intel online training as well,

https://www.intel.com/content/www/us/en/programmable/support/training/course/odjtag1110.html

Regards,

Vicky

Forum Discussion

Trouble connecting DE0-Nano board to computer for programming.

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work